“Drum wood chipper” Heizohack HM 14-860 KL

HEIZOHACK HM 14-860 KL is the largest wood chipper with a 690 mm size chopping drum. There are many additional options that make this shredder the best in its class. For additional options request in person.

Truck:

• MB Arocs 3353 AK 6×6 (390 kW) diesel Euro 6 engine;
• Cab with swivel operator chair, magnified window, air conditioning, radio, video camera on the end of the chip exhaust pipe, remote full shredder control, retraction drum lift / press and sudden retraction reversing feet;
• hydraulic manipulator Palfinger Epsilon M80F101 (10.1 m long);
• hydraulic manipulator control electro-hydraulic with micro levers Joystick EHC Prof 1;
• 4 work lamps on the cab, one on the chip exhaust pipe and 4 on the hydraulic manipulator;
• reversing camera at the rear of the truck; automatic trailer hitch Ringfeder with 50mm pin;

Inclusion of wood:

• conveyor 900 mm long;
• folding wood feeding table with integrated conveyor and rotating roller at the end of the table. Table length 1,500 mm, conveyor length 900 mm;
• wood pressing drum diameter 800 mm;

Shredding:

• fourteen quick-change 90 mm blades arranged evenly around the entire chopping drum;
• chopping drum diameter 690 mm;
• wood receiving opening 800 x 1,215 mm;
• good wood cutting is ensured by the counterblade;
• chip size is guaranteed by interchangeable sieves. Available in: 35/40, 50/50, 45/60, 60/80, 100/100 mm holes. When ordering, a specific size is selected;

Chip emissions:

• chipping the chips with four screws;
• chip exhaust drum with three interchangeable blades;
• the exhaust pipe is hydraulically rotated and height-adjustable from 3.80 m to 5.30 m;
• exhaust and fan replaceable plates made of reinforced steel (wears 6 times slower than Hardox steel);

Management:

• autonomous, hydraulic wood intake system;
• automatic feed stop if the blades get stuck or the speed of the chopping drum falls;
• electro-hydraulic conveyor and pressure drum control forward / backward, speed regulation;
• forced lifting or pressing of the pressure drum; remote control of chip exhaust pipe, feed table and conveyor; working hours accounting;
• additional pedals for raising the pressure drum and reversing the conveyor;
• a chamber at the end of the exhaust pipe with a monitor at the operator’s workstation;

Hydraulic manipulator:

• model: Palfinger Epsilon S110F101 maximum reach;
• 10.10 m turning angle;
• 385 degrees rotator;
• Indexator grapple;
• Hultdings Super Grip SG II 260 R, 0.28 m2 control;
• Prof1 micros levers with additional functions Accessories;
• work lights;
• windscreen wiper at the operator’s workplace;
• 4 hydraulic support legs;
• sieve holder for additional sieve;
• reversing camera;