HM 10-500 K

Technical characteristics:

Wood Inclusion:

  conveyor 900mm long, additional 1,200mm available

  wood feeding table 1,500 mm long with rotating roller at the end of the table

  diameter of the wood pressure drum 800 mm


  ten quick-change 90mm knives evenly spaced around the chopping drum

  chopping drum diameter 500mm

  wood receiving hole 500×877 mm (max. diameter 500 mm)

  a good wood cut ensures an anvil

  chip size is guaranteed by interchangeable sieves with standard 45/60 mm holes

Chip emissions:

  chips ejection drum with three replaceable blades

  exhaust pipe hydraulically pivoting and height adjustable from 3.35 m to 4.79 m (depending on chassis and tires)


  autonomous, hydraulic wood retraction system

  atomic feed stop in case of knives jamming or dropping drum speed, electro-hydraulic forward / reverse control of conveyor and squeegee drum, speed control, forced lift or squeeze of squeegee drum.

  remote control of chips exhaust pipe, feed table and conveyor (control panel with 10 m cable)

  working hours accounting.

weight: 7,500kg

Technical requirements:

  power: 100 – 180 kW (130 – 230 hp)

  rpm: 800-1000 rpm