Manipulator K.T.S 6.7m

The K.T.S 6.7m manipulator is one of the most ambitious manipulators produced. Reach – 6.7 meters. Lifting torque – 50 kNm. The manipulator has an boom extension. Stronger and more reliable gearbox design. As standard, the crane is equipped with a 3-ton rotator and GR21H (0.21 m2) grab made of Hardox® steel. It is a powerful manipulator for professional work in the forest.

Specifacation:

  • maximum reach in meters – 6.7 m;
  • lifting torque – 50 kNm;
  • rotator torque – 630 Nm;
  • number of reduction cylinders – 4 pcs;
  • weight with gripper and rotor – 992 kg;
  • 6,7 m: 1m – 3575 kg; 3m – 1590 kg; 5m – 721 kg; 6,7m – 426kg;
  • the reducers used in the manufacture of all K.T.S manipulators are cast, made in Sweden. They are fitted with 4 turning cylinders for maximum torque and minimum wear of parts;
  • the central lubrication system allows lubrication of the upper lubrication points of the manipulator while standing on the ground. No need to climb, so no risk of falling;
  • all manipulator cylinders are mounted on top of the first boom, thus reducing the risk of damage during operation;
  • all manipulator hydraulic hoses mounted on top provide better protection without impeding access to them;
  • the K.T.S 6.7m manipulator has wide drawbars between the first and second booms that evenly distribute the load when straightening the booms; low parking position;
  • the telescopic boom extension hoses are fixed in such a way as to reduce the risk of damage and not to interfere with work;
  • the manipulator is equipped with a durable 3-ton rotator, a rotator holder and a 0.21 m2 gripper made of Hardox® metal;